Ronin DJI Pro


The versatile Ronin 2 gimbal from DJI is suitable for use handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the Arri Alexa Mini and Sony FS7.

Like its predecessor, the Ronin 2 features support for Underslung, Upright, and Briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between Upright and Underslung modes without changing the position of the camera. It also offers a number of other improvements, in particular, enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.

Upgraded high torque motors allow the gimbal to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car, and keep it moving smoothly in flight.

Category: Product ID: 1848


Electrical and Mechanical
Working Current Static: 300 mA (at 22.8 V)
Dynamic: 500 mA (at 22.8 V)
Locked Motor: Up to 15 A (at 22.8 V)

Payload Capacity 30 lb / 13.6 kg
Precision of Control ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 400°/s
Tilt Axis: 360°/s
Roll Axis: 360°/s
Controlled Rotation Range Pan Axis Control: 360° continuous rotation
Tilt Axis Control: +45° to -135°
Roll Axis Control: ±45°
Battery Life Maximum: 8 hours
Typical when Powering Camera/Accessories: 2.5 hours
Gimbal Controller
CPU 32-bit ARM processor
Sensors Independent IMU module
Temperature sensors
Positioning GPS
Operation Modes Underslung Mode
Upright Mode
Briefcase Mode
Interface Built-in touch panel

Frequency 2.4 GHz / 5.8 GHz switchable
Wireless Bluetooth 4.0
Wired 1 x D-Bus
1 x USB Type-C
Accessory Power Ports 4 x 14.4 V Camera Cage (combined 8 A)
2 x 12.6 V Pan Motor (combined 4 A)
1 x 12.6 V P-Tap (8 A)

System Requirements
Assistant Software Windows: 7 or above
macOS: 10.11 or above
iOS: 9 or above
Android: 4.4 or above

Chemistry Lithium-ion polymer
Capacity 4280 mAh / 97.58 Wh
Voltage 22.8 V
Note Compatible with Inspire 2 flight battery. Not compatible with batteries for prior Ronin models.

Camera Tray Dimensions Maximum Depth from the Center of Gravity on Camera Baseplate: 9.6″ / 245 mm
Maximum Height Measured from Top of the Camera Baseplate: 6.5″ / 165 mm
Maximum Width: 7.1″ / 180 mm
Mounting Compatibility Handheld
Car Mount


There are no reviews yet.

Be the first to review “Ronin DJI Pro”

Your email address will not be published. Required fields are marked *


Address: Jalan Pantai Pererenan 98C, Pererenan Mengwi, Bali 80351, Indonesia


Mon – Fri: 9:00AM – 6:00PMSat-Sun: Closed